Biocidal solution for the pre-treatment of surfaces with algae
and fungi growth interior and exterior. (leave on no wash off)
Always apply by paint brush. Clean tools immediately after use with water
Field of Application
Aqueous microbicidal solution. Supports the cleaning of exterior and interior surfaces infested with algae and fungi before the application of coatings. Capatox is ready for use.
Remove all traces of fungal (fungi/mildew/mould) attack on interior surfaces by wet cleaning, in compliance with legal and official regulations (follow e.g. Ordinance on Biological Agents and Ordinance on Hazardous Substances). Remove algae and fungi on exterior surfaces with a water jet, in compliance with the regulations. Remove plants and suctorial organs of plants by mechanical means and/or deseaming. Treat the cleaned surfaces liberally with Capatox and allow to dry well. No need to wash off!
Method of Application
Approx. 50–150 ml/m2 according to roughness and absorbency of the substrate. Always apply Capatox undiluted.
Packaging/Package Size, 1 litre, 5 litres
Storage, Keep in a cool, but frost-free place.
Density, Approx. 1.02 g/cm3
Suitability according to Technical Information No. 606 Definition of Application Areas
|Interior 1||Interior 2||Interior 3||Exterior 1||Exterior 2|
|(–) inapplicable / (○) of limited suitability / (+) suitable|
Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)
Contains alkyldimethyl benzyl ammonium chloride.
Use biocidal products safely. Always read labelling and product information. Causes skin irritation.
Keep out of the reach of children. Avoid release to the environment. IF ON SKIN: Wash with plenty of
soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.