Caparol Nespri MAXX Class 1 Matt Emulsion

£110.65

Caparol NespriMaXX

This wall emulsion has been designed to be sprayed using airless machines, This paint has very high opacity and contains conditioners to help with flow and finish and reduce overspray.

For mist free spraying you can use Nespri system see below.

High-coverage interior paint for efficient coating in the Nespri-TEC spray process.

High-covering versatile interior paint for matt wall and ceiling coatings with optimal processing properties. Can also be used in sensitive work and living areas. High-quality, abrasion-resistant and structure-preserving for all load-bearing substrates.

Spray application: 

For the surface: Spray angle: 30 ° / Nozzle: special Nespray 0.016-0.019 "double nozzle, for trimming: Spray angle 20 ° / Nozzle: 0.013" Nespray special nozzle.
The distance to the ground should be max. 30 cm, this can not be guaranteed, should a nozzle extension from Wagner be used. Material temperature is automatically controlled by the Nespray airless device. The closing pressure (closed spray gun) is set on the device in the area marked in blue. Spray pressure (opened spray gun) is then in the green marked area.

Cleaning the tools with water, Other coating materials, especially primers, can also be processed with the Nespray airless device. In these products, however, a fog-free processing is not guaranteed. These products must be handled with appropriate precautions.

coating System

In special Nespri-TEC spray technique: Apply a rich, even coat of Nespri ®  MaXX with the special Nespray airless device and immediately roll evenly with a standard short-pile paint roller (12-16 mm). On high-contrast, heavily or differently absorbent surfaces, a previous primer coat should be applied.

consumption

Approx. 170 ml / m 2 per operation on a smooth surface. On rough surfaces accordingly more. Exact consumption by testing coating determined.

processing conditions

Lower temperature limit during processing and drying: +5 ° C for circulating air and substrate.

Drying / Drying Time

At +20 ° C and 65% rel. Humidity after 4 to 6 hours. Surface dry and recoatable. Dried and loadable after approx. 3 days. At lower temperatures and higher humidity these times are longer.

Customer Reviews

Based on 1 review Write a review
Left Continue shopping
Your Order

You have no items in your cart