Fiddes Hard Wax Oil Oak Lightning Dead Matt


OAK LIGHTENING HARD WAX OIL – A lightly tinted Hard Wax Oil that once applied maintains the natural colour of the timber. Extremely popular on Oak and lighter woods such as Ash, Sycamore and Maple. Apply two coats as recommended.

Fiddes Hard Wax Oil is a blend of natural oils & waxes offering exceptional durability & resistance for internal natural wood flooring, kitchen worktops (wood) and areas subjected to a high degree of wear.

Produces a quick drying, natural satin / matt water repellent, tread-fast finish that will not peel or flake. To maintain / renovate, simply wash, buff or re-apply, following the guidelines below.

Suitable for application onto children’s toys – EN 71-Toy Safety Certification

Resistant to liquids: Tested in accordance with BS 3900 G5

Resistant to wear: Tested in accordance with BS3900 E15


Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150 grade sanding paper or 150 grit sanding disk, removing all traces of dust.

Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Hard Wax Oil is formulated for application directly, and does not require thinning.

Stir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply evenly using Fiddes Floor Oil Brush or a good quality bristle or synthetic brush, following the direction of the grain. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight.

Apply as first coat. Leave to dry 4-6 hours in warm well ventilated conditions. Clean applicators with White Spirit. When the area is completely dry, a light buff will further enhance sheen level. With the exceptions of White, Belgium Grey and Oak Lightening, a single coat of Tinted Hard Wax Oil is recommended and then finished with Clear Hard Wax Oil.

For regular cleaning apply a light spray of Fiddes Wood Surface Cleaner, and area buffed once dry removing any minor blemishes. Periodically, an application of Fiddes Floor Surface Cleaner is recommended in areas subjected to heavy wear. Re application of Fiddes Hard wax oil may be required in certain areas, where staining is apparent. To renovate previous application of Fiddes Hard Wax Oil, lightly sand area with 150 grit sandpaper, and re-apply sparingly.

A single application will cover approximately 20-24 square meters per litre,depending on the density of the substrate.

5ml, 250ml, 1lt, 2.5lt

Left Continue shopping
Your Order

You have no items in your cart